Flooring Co., Ltd. of Zhuhai Shen Fei (anti-static flooring manufacturers) specializes in anti-static flooring business, professional anti-static flooring production, sales and construction of train services, experts teach you anti-static flooring selection methods, ways to get started.

The number of the total area of 1, first of all need accurate computer room needed for the building of anti-static floor (or blocks) and a variety of accessories (standard ratio 1:3.5,1:5.2), and left margin, so as to avoid wasting or shortages.

Fully understand the variety and quality of the anti-static flooring , as well as a variety of technical performance indicators produced by the manufacturer .

The technical performance of the anti-static flooring mainly refers to its mechanical and electrical properties. The mechanical properties of the main consideration of its carrying capacity, wear resistance. Piece of anti-static flooring installation lap up the truss, flat on the anti-static flooring, its carrying capacity should reach uniform load greater than 1000kg/m2, anti-static floor in any part of the concentrated load should be greater than 300kg 300kg load of a diameter of 6cm loading point of the upper bearing, the deflection amount should be less than 2mm, and no permanent deformation.

Adjustable support should be able to withstand a vertical load of more than 1000kg, and the board should have a certain degree of abrasion resistance. The electrical performance is mainly the system resistance, surface resistance. System resistance should 106Ω-109Ω, at a temperature of 21 ± 1.5 ° C, relative humidity of 30%, the antistatic flooring electrostatic voltage should be less than 2500V surface resistance values ??for 106Ω-109Ω.

3, should the weight of the heaviest of all devices in the engine room equipment is determined on the basis of the anti-static floor load, this can prevent some heavy equipment caused by the floor of the permanent deformation or breakage.

4, anti-static floor by the impact of changes of the external environment conditions. That is not due to the external environment temperature is too high, too low, obviously retractable higher temperature in the engine room, anti-static floor stretching expansion, can not be removed and replaced; antistatic flooring at low temperatures contraction, resulting in loose dynamic. The amount of shrinkage of the anti-static floor affected by environment should be less than 0.5mm, the amount of deflection of the board should be less than 0.25mm.

5, anti-static floor surface should be non-reflective, non-skid, corrosion-resistant, no dust, no dust, easy to clean.

keywords: Shenfei antistatic flooring, antistatic raised floor, elevated floor activities, elevated activity of anti-static floor,