Room building, anti-static floor should pay attention to the following:

First need a computer room construction of the required anti-static floor area (or block) and a variety of accessories (standard ratio 1:3.5,1:5.5), quantity, and the left margin, to avoid wastage or shortages.

A full understanding of the manufacturers produce the variety and quality of the anti-static flooring, and a variety of performance indicators. The technical performance of the anti-static flooring refers to the mechanical and electrical performance and mechanical properties considering its carrying capacity and wear resistance. The entire anti-static flooring installed in the truss leveling anti static flooring to lap up its carrying capacity should reach the uniform load is greater than 1000kg/m2, anti-static concentrated load of any part of the floor should be more than 300kg. at the diameter 6cm loading point, load-bearing 300kg load, the deflection should be less than 2mm, there is no permanent deformation. Adjustable support should be able to withstand a vertical load of more than 1000kg, the board should have a certain degree of abrasion. The electrical properties of the system resistance, surface resistance. Resistance should be for the 106Ω-109Ω, at a temperature of 21 ± 1.5 ° C, relative humidity of 30%, anti-static flooring static voltage should be less than 2500V, the surface resistance value is 106Ω-109Ω,

3, should be the heaviest weight of the equipment in the engine room equipment for the benchmark to determine the load of anti-static flooring, this can prevent some of the equipment too heavy and caused the floor to permanent deformation or breakage.

4, anti-static floor by the outside environmental conditions change and not the outside ambient temperature is too high, too low, obviously stretching, which is slightly higher when the room temperature, anti-static floor stretching expansion can not be removed and replaced ; low temperature anti-static floor contraction, resulting in a loose dynamic. The anti-static floor by the contraction of the environmental impact should be less than 0.5mm, the deflection of the plate surface should be less than 0.25mm.

5, anti-static floor surface should be non-glare, non-skid resistance, corrosion resistance, no dust, no dust, easy to clean.

keywords: Anti-static flooring, anti-static activities flooring, antistatic flooring, static flooring, raised floor, raised floor,